The latest IBM certification 000-017 exam practice questions and answers

ITCertKing is a professional website. It focuses on the most advanced IBM 000-017 for the majority of candidates. With ITCertKing, you no longer need to worry about the IBM 000-017 exam. ITCertKing exam questions have good quality and good service. As long as you choose ITCertKing, ITCertKing will be able to help you pass the exam, and allow you to achieve a high level of efficiency in a short time.

Through the IBM certification 000-017 exam method has a lot of kinds, spend a lot of time and energy to review the IBM certification 000-017 exam related professional knowledge is a kind of method, through a small amount of time and money ITCertKing choose to use the pertinence training and exercises is also a kind of method.

Exam Code: 000-017
Exam Name: IBM (Foundations of Tivoli process automation engine V7.1)
One year free update, No help, Full refund!
Total Q&A: 102 Questions and Answers
Last Update: 2013-12-25

ITCertKing's IBM 000-017 exam training materials allows candidates to learn in the case of mock examinations. You can control the kinds of questions and some of the problems and the time of each test. In the site of ITCertKing, you can prepare for the exam without stress and anxiety. At the same time, you also can avoid some common mistakes. So you will gain confidence and be able to repeat your experience in the actual test to help you to pass the exam successfully.

ITCertKing's expert team has developed a latest short-term effective training scheme for IBM certification 000-017 exam, which is a 20 hours of training for the candidates of IBM certification 000-017 exam. After training they can not only quickly master a lot of knowledge, but also consolidate their original knowledge. So they can easily pass IBM certification 000-017 exam and it is much more cost-effective for them than those who spend a lot of time and energy to prepare for the examination.

You have ITCertKing IBM 000-017 certification exam training materials, the same as having a bright future. ITCertKing IBM 000-017 exam certification training is not only the cornerstone to success, and can help you to play a greater capacity in the IT industry. The training materials covering a wide range, not only to improve your knowledge of the culture, the more you can improve the operation level. If you are still waiting, still hesitating, or you are very depressed how through IBM 000-017 certification exam. Do not worry, the ITCertKing IBM 000-017 exam certification training materials will help you solve these problems.

ITCertKing help you to find real IBM 000-017 exam preparation process in a real environment. If you are a beginner, and if you want to improve your professional skills, ITCertKing IBM 000-017 exam braindumps will help you to achieve your desire step by step. If you have any questions about the exam, ITCertKing the IBM 000-017 will help you to solve them. Within a year, we provide free updates. Please pay more attention to our website.

000-017 Free Demo Download: http://www.itcertking.com/000-017_exam.html

NO.1 When creating a new escalation, what is the most likely reason that the conditional SQL Expression
Builder does not list attributes to use?
A.An object has not been linked in the Applies To field.
B.The escalation has not been linked to an existing attribute.
C.The Create Condition Entry Disabled check box is selected.
D.The escalation has not been linked to an existing application.
Answer: A

IBM   000-017 study guide   000-017   000-017   000-017

NO.2 Which factor would normally be considered when developing a primary location hierarchy?
A.the financial relationship between locations
B.the functional relationship between locations
C.the geophysical relationship between locations
D.the organizational relationship between locations
Answer: C

IBM exam   000-017 dumps   000-017

NO.3 Which function is performed when enabling Application Server security during the installation?
A.configuring Database Server to use Application Server security
B.configuring the Tivoli process automation engine application so that it handles authorizations to use the
application
C.modifying the J2EE application so that authentication will be handled by an external source such as
IBM Tivoli Directory Server or Microsoft Active Directory
D.modifying the Tivoli process automation engine application so that authentication is handled through
the application rather than an external source such as IBM Tivoli Directory Server or Microsoft Active
Directory
Answer: C

IBM braindump   000-017 questions   000-017   000-017   000-017 demo

NO.4 A client has a workflow requirement on new asset records. Part of this requirement is that the
Contracts representatives from the Lease and Warranty groups review and validate contracts the asset
may or may not be under. The asset record cannot move to the next part of the workflow process until all
assignments are completed.
Which data elements and actions can be used to configure this part of the workflow process?
A.Use an Interaction node and assign to the Leasing and Warranty roles. Configure the task to indicate
that the Perform Acceptance Action is for when all assignments are accepted. Configure the Positive
connection line coming from this Task node to indicate an action that Leasing and Warranty Contracts
have been reviewed and this asset is under a contract. Configure the Negative connection line coming
from this Task node to indicate an action that Leasing and Warranty Contracts have been reviewed and
this asset is not under a contract.
B.Use a Task node and assign to the Leasing and Warranty roles. Configure the task to indicate that the
Perform Acceptance Action is for when all assignments are accepted. Configure the Positive connection
line coming from this Task node to indicate an instruction that indicates that Leasing and Warranty
Contracts have been reviewed and this asset is under a contract. Configure the Negative connection line
coming from this Task node to indicate an instruction that Leasing and Warranty Contracts have been
reviewed and this asset is not under a contract.
C.Use an Interaction node and assign to the Leasing and Warranty roles. Configure the task to indicate
that the Perform Acceptance Action is for when any assignments are accepted. Configure the Positive
connection line coming from this Task node to indicate an instruction that indicates that Leasing and
Warranty Contracts have been reviewed and this asset is under a contract. Configure the Negative
connection line coming from this Task node to indicate an instruction that Leasing and Warranty Contracts
have been reviewed and this asset is not under a contract.
D.Use a Task node and assign to the Leasing and Warranty roles. Configure the task to indicate that the
Perform Acceptance Action is for when any assignments are accepted. Configure the Positive connection
line coming from this Task node to indicate an instruction that indicates that Leasing and Warranty
Contracts have been reviewed and this asset is under a contract. Configure the Negative connection line
coming from this Task node to indicate an instruction that Leasing and Warranty Contracts have been
reviewed and this asset is not under a contract.
Answer: B

IBM original questions   000-017 exam   000-017   000-017 test answers

NO.5 What does the Schedule field refer to when creating an escalation?
A.the schedule by which the escalation will poll for conditions
B.the scheduled working hours of the escalation response team
C.the scheduled days of the week for which the escalation path is valid
D.a scheduled timer that is set when the condition checked by the escalation change, after which the
escalation fires
Answer: A

IBM original questions   000-017   000-017 certification

NO.6 A customer wants to ensure that any data sent to the Tivoli process automation engine's Integration
Framework for retrieval of financial data into the Tivoli process automation engine can survive restarts
and failures.
Which statement is true?
A.A JMS messaging engine must be configured with a persistent data store.
B.The customer must have the persist data option set for the Integration Framework adapter.
C.It can be configured by setting a property inside the Tivoli process automation engine after installation.
D.The messages are stored local to the adapter and will survive failures without any additional
configuration.
Answer: A

IBM   000-017   000-017 dumps   000-017   000-017 practice test

NO.7 A pharmaceutical company has made a tremendous number of configurations in their development
environment in order to meet their business requirements and the government regulations. The company
is ready to move 25% of these configurations into the test environment.
How should this be accomplished?
A.Export the XML and then import it again as appropriate into the test environment.
B.All of the configurations must be brought over. It is impossible to define only 25% of the configurations.
C.A package of the appropriate configurations should be defined and created. It should be distributed and
then deployed into the test environment.
D.Create a package of the appropriate configurations. Then use the Integration Framework to export
those configurations. Finally, use the Integration Framework to import the configurations into the Test
environment again.
Answer: C

IBM exam dumps   000-017 test answers   000-017 exam   000-017 practice test   000-017

NO.8 Which two data elements are required to configure a Conditional user interface Control? (Choose two.)
A.Domain
B.Person Group
C.Object Structure
D.Signature Option
E.Conditional Expression
Answer: DE

IBM test   000-017   000-017 exam

NO.9 A business requires the blocking of status changes when a work order record is in workflow, unlocking
at a certain point to perform a status change to APPR, and then relocking when the status change occurs.
Leveraging the workflow tool, what are the necessary data elements and steps to meet this requirement?
A.On the workflow connector line where the status block is to begin use the NOSTATUS action. To unlock
the status change block, prior to the next status change, on a connector line use the OKSTATUS action.
B.In the Actions application, for the work order object, create the following Change Status type actions:
OKSTATUS, WOAPPR, NOSTATUS. On the workflow connector line where the status block is to begin
use the NOSTATUS action. To unlock the status change block, prior to the next status change, on a
connector line use the OKSTATUS and WOAPPR actions.
C.In the Actions application, create an Action Group for the work order object with the following members
in the following order: OKSTATUS, Work Order Approval action, NOSTATUS. On the workflow connector
line where the status block is to begin use a NOSTATUS action. To unlock the status change block, prior
to the next status change, on a connector line use the Action Group.
D.In the Actions application, for the work order object, create the following Change Status type actions:
OKSTATUS, WOAPPR, NOSTATUS. Create an Action Group for the work order object with the following
members in the following order: OKSTATUS, WOAPPR, NOSTATUS. On the workflow connector line
where the status block is to begin use a NOSTATUS action. To unlock the status change block, prior to the
next status change, on a connector line use the Action Group.
Answer: C

IBM test answers   000-017   000-017   000-017 original questions

NO.10 Which two types of condition can be created using the Conditional Expression Manager? (Choose
two.)
A.class
B.unique
C.universal
D.expression
E.conditional
Answer: AD

IBM   000-017   000-017 test questions   000-017 test   000-017   000-017

NO.11 The property mxe.rmi.port can be found in maximo.properties and by the System Properties
application.
If mxe.rmi.port is set to 0 in the properties file, and is set to 1090 from the System Properties application,
which statement is true about this property?
A.This property value cannot be set to 0 in the properties file. Therefore, the value must be 1090.
B.The Tivoli process automation engine terminates with an error on startup because the two settings are
not consistent.
C.The value in the Tivoli process automation engine properties overrides the value found in the properties
file. So the property value would be 1090.
D.The value in the properties file overrides the value found when viewing Tivoli process automation
engine properties, so the property value would be 0.
Answer: D

IBM exam dumps   000-017 test   000-017 answers real questions   000-017   000-017

NO.12 When defining Security Groups which parameters can be specified?
A. Users, Sites, Applications and Storerooms
B. Storerooms, Group, Person and Applications
C. Users, Security, Data Restrictions and Access Rights
D. Permissions, Applications, Locations and Departments
Answer: A

IBM certification   000-017   000-017   000-017 certification

NO.13 When the agent saves the service request ticket, the system launches into a Service Request
Workflow process and evaluates the data on the record. If the agent has not entered asset, location, or
configuration item data, the system displays a dialog box with the following options:
Close ticket - informational call
Close ticket - unauthorized caller
Close ticket - misdirected call
Take no action
If an asset, location, or configuration item is specified on the record, the system displays a dialog box with
the following options:
Take Ownership of ticket
Assign Ownership of ticket
Create Work Order
Take no action on this ticket
Which three Nodes are used in this part of the workflow process? (Choose three.)
A.Wait
B.Input
C.Task
D.Condition
E.Interaction
F.Manual Input
Answer: DEF

IBM test answers   000-017 practice test   000-017   000-017   000-017 dumps   000-017

NO.14 Which property must be specified in maximo.properties?
A.mxe.db.user
B.mxe.rmi.port
C.mxe.http.port
D.mxe.UserLicenseKey
Answer: A

IBM answers real questions   000-017 answers real questions   000-017 demo

NO.15 Which type of domain has an internal value?
A.Table
B.Numeric
C.Synonym
D.Crossover
Answer: C

IBM exam prep   000-017 exam   000-017

NO.16 Which method is used to validate the escalation being created?
A.Choose the Select action for Validate.
B.There is no validation of the escalation.
C.Save the escalation. Validation is automatic.
D.Click the Action button, which resembles a green check mark.
Answer: A

IBM exam   000-017   000-017 exam dumps   000-017 answers real questions

NO.17 Which three workflow application actions (APPACTION) can only be used in conjunction with an
Escalation and the WFASSIGNMENT object? (Choose three.)
A.WFAUTO
B.WFCOND
C.WFREJECT
D.WFINITIATE
E.WFACCEPT
F.WFESCALATE
Answer: CEF

IBM   000-017 exam   000-017   000-017 braindump   000-017 exam simulations

NO.18 Which type of domain cannot have a Lookup created for it?
A.Table
B.Numeric
C.Synonym
D.Numeric Range
Answer: D

IBM   000-017   000-017   000-017

NO.19 Which statement is true about the Conditional Expression Manager?
A.It creates and stores libraries of SQL statements.
B.It dynamically assigns a user to a Security Group based on a condition.
C.It controls workflow paths automatically when certain users are involved.
D.It creates conditions for group membership to automatically associate users into groups.
Answer: A

IBM   000-017 demo   000-017   000-017 answers real questions

NO.20 Which configuration option should be set when creating an escalation?
A.any related notifications to the escalation
B.the severity of the event that will be created
C.pager numbers in a comma-separated list in the escalation
D.the Peregrine or Remedy queue in which the escalation is placed
Answer: A

IBM exam dumps   000-017 exam   000-017 test   000-017   000-017

ITCertKing offer the latest HP2-B103 exam material and high-quality NS0-156 pdf questions & answers. Our C_TSCM52_64 VCE testing engine and 642-427 study guide can help you pass the real exam. High-quality HH0-240 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/000-017_exam.html