Why do most people choose ITCertKing? Because ITCertKing could bring great convenience and applicable. It is well known that ITCertKing provide excellent HP HP0-J12 exam certification materials. Many candidates do not have the confidence to win HP HP0-J12 certification exam, so you have to have ITCertKing HP HP0-J12 exam training materials. With it, you will be brimming with confidence, fully to do the exam preparation.
If you choose to sign up to participate in HP certification HP0-J12 exams, you should choose a good learning material or training course to prepare for the examination right now. Because HP certification HP0-J12 exam is difficult to pass. If you want to pass the exam, you must have a good preparation for the exam.
The HP0-J12 examination certification, as other world-renowned certification, will get international recognition and acceptance. People around the world prefer HP0-J12 exam certification to make their careers more strengthened and successful. In ITCertKing, you can choose the products which are suitable for your learning ability to learn.
There are many ways to help you prepare for your HP HP0-J12 exam. ITCertKing provide a reliable training tools to help you prepare for your HP HP0-J12 exam certification. The ITCertKing HP HP0-J12 exam materials are including test questions and answers. Our materials are very good sofeware that through the practice test. Our materials will meet all of theIT certifications.
If you want to buy HP HP0-J12 exam information, ITCertKing will provide the best service and the best quality products. Our exam questions have been authorized by the manufacturers and third-party. And has a large number of IT industry professionals and technology experts, based on customer demand, according to the the outline developed a range of products to meet customer needs. HP HP0-J12 exam certification with the highest standards of professional and technical information, as the knowledge of experts and scholars to study and research purposes. All of the products we provide have a part of the free trial before you buy to ensure that you fit with this set of data.
HP certification HP0-J12 exam is very popular among the IT people to enroll in the exam. Passing HP certification HP0-J12 exam can not only chang your work and life can bring, but also consolidate your position in the IT field. But the fact is that the passing rate is very low.
Exam Code: HP0-J12
Exam Name: HP (Supporting ESL E-Series and EML E-Series Libraries)
One year free update, No help, Full refund!
Total Q&A: 119 Questions and Answers
Last Update: 2013-10-09
If you are still study hard to prepare the HP HP0-J12 exam, you're wrong. Of course, with studying hard, you can pass the exam. But may not be able to achieve the desired effect. Now this is the age of the Internet, there are a lot of shortcut to success. ITCertKing's HP HP0-J12 exam training materials is a good training materials. It is targeted, and guarantee that you can pass the exam. This training matrial is not only have reasonable price, and will save you a lot of time. You can use the rest of your time to do more things. So that you can achieve a multiplier effect.
HP0-J12 Free Demo Download: http://www.itcertking.com/HP0-J12_exam.html
NO.1 Which scheme is used in the Command Line Interface for drive and slot numbers in ESL E-Series
tape libraries?
A.0 based
B.1 based
C.2 based
D.Hex based
Answer: B
HP test answers HP0-J12 exam simulations HP0-J12
NO.2 Click the Exhibit button.
Which component is connected to port E1 of the cluster controller if it is in drive cluster 0 of an ESL
E-Series tape library?
A.cabinet controller
B.Interface Controller
C.lower cluster controller
D.Interface Manager card
Tape Library
Answer: A
HP exam prep HP0-J12 practice test HP0-J12 study guide HP0-J12 study guide
NO.3 When is Lock Element Addressing used in the ESL E-Series library?
A.with multiple tape drive clusters
B.as an electronic lock of the access doors
C.when multiple Interface Controllers are used
D.for cross-linked libraries with three or more cabinets
Answer: D
HP certification training HP0-J12 HP0-J12 HP0-J12 demo
NO.4 Click the Exhibit button.
Which ESL E-Series tape library configuration is shown in the Operator Control Panel Library screen?
A.last cabinet
B.primary cabinet
C.secondary cabinet
D.stand-alone cabinet
Answer: B
HP certification HP0-J12 HP0-J12 HP0-J12 certification training
NO.5 What are the standard cabling requirements for the Interface Manager card of an EML E-Series tape
library?
A.4 x Ethernet to interface controllers, 1 x Ethernet to robotics controller, 1 x Ethernet to LAN
B.4 x Ethernet to interface controllers, 1 x Fibre Channel to robotics controller, 1 x Ethernet to LAN
C.4 x Fibre Channel to interface controllers, 1 x Ethernet to robotics controller, 1 x Ethernet to LAN
D.4 x Fibre Channel to interface controllers, 1 x Fibre Channel to robotics controller, 1 x Ethernet to LAN
Answer: A
HP study guide HP0-J12 demo HP0-J12 test answers HP0-J12
NO.6 With which management specification does the Command View TL Provider comply?
A.Direct Management Initiative (DMI)
B.Advanced Remote Management (ARM)
C.Simple Network Management Protocol (SNMP)
D.Storage Management Initiative Specification (SMI-S)
Answer: D
HP HP0-J12 questions HP0-J12 certification HP0-J12 study guide
NO.7 Which statement about an EML E-Series library is correct?
A.It allows serverless backup with only a few configuration steps if a Secure Manager license is installed.
B.The initial configuration can be done over the front panel, Command View TL or the serial port on the
robotics controller using CLI.
C.It is fully compliant with the Storage Management Initiative Specifications (SMI-S) and can be
configured with HP Storage Essentials.
D.It bridges the capabilities and features between the business-class HP StorageWorks MSL Series and
enterprise-class ESL E-Series tape libraries.
Answer: D
HP test questions HP0-J12 HP0-J12 HP0-J12 test questions
NO.8 How many cartridge slots can be used in an 8U drive expansion module mounted at the bottom of an
EML E-Series library?
A.48
B.87
C.94
D.103
Answer: B
HP HP0-J12 exam prep HP0-J12 test answers HP0-J12
NO.9 What can be connected using the vacant Ethernet port on the right side of the cabinet controller in an
ESL E-Series tape library?
A.an external LAN
B.cluster controllers
C.interface management card
D.Fibre Channel interface controllers
Answer: A
HP questions HP0-J12 HP0-J12
NO.10 What are advantages of using Secure Manager EML? (Select two.)
A.It allows library partitioning.
B.Management of direct backup is allowed.
C.It provides faster access to tape devices.
D.Device level mapping is easily configured.
E.User access management is easily configured.
Answer: AD
HP dumps HP0-J12 answers real questions HP0-J12 HP0-J12 exam prep
NO.11 What is the hard wired IP address of the Interface Manager card in an EML E-Series tape library on the
private network?
A.1.1.1.1
B.10.0.0.1
C.192.168.2.1
D.155.155.155.1
Answer: C
HP braindump HP0-J12 HP0-J12 braindump HP0-J12 HP0-J12 test
NO.12 Click the Exhibit button.
Which ESL E-Series tape library component does the exhibit display?
A.cluster controller
B.cabinet controller
C.Interface Manager
D.Interface Controller
Answer: C
HP exam HP0-J12 HP0-J12 exam HP0-J12 pdf HP0-J12
NO.13 Click the Exhibit button.
What is the maximum supported number of drives that can be installed in a CLM configuration?
A.40
B.44
C.60
D.64
Answer: B
HP certification training HP0-J12 exam HP0-J12 exam prep HP0-J12 questions HP0-J12 braindump HP0-J12
NO.14 What can you do to speed up the power-on process while troubleshooting an EML 71e library?
A.Remove all media from the library.
B.Power-on the library with the load port door open.
C.Disable the auto audit, remembering to re-enable it and reboot the library before leaving the customer
site.
D.Configure inventory mode to bar code labels not required, remembering to reset bar code labels
required before leaving the customer site.
Answer: C
HP HP0-J12 HP0-J12 test HP0-J12 HP0-J12 pdf HP0-J12 test answers
NO.15 Which HP document provides the most current, supported configurations for Enterprise class libraries
in a SAN environment?
A.Service Guide
B.SAN Design Guide
C.EBS Compatibility Matrix
D.training course documentation
Answer: C
HP exam HP0-J12 dumps HP0-J12 HP0-J12
NO.16 What is important to remember when changing from Manual to Automatic mode of the Interface
Manager of an ESL E-Series tape library?
A.All drives must be taken offline.
B.Fibre Channel cables must be unplugged.
C.Interface Controllers must be powered off first.
D.Any customizations created in Manual mode will be lost.
Answer: D
HP HP0-J12 test HP0-J12 answers real questions
NO.17 How often is the CommandView TL Health Summary screen updated?
A.every 30 seconds
B.at 15-minute intervals
C.whenever the library status changes
D.configurable to any value up to 900 seconds
Answer: C
HP HP0-J12 HP0-J12 HP0-J12 certification training HP0-J12 exam simulations
NO.18 Click the Exhibit button.
Which ESL E-Series tape library component (used to carry data cartridges to a secondary cabinet) is
shown in the figure?
A.CLM arm
B.CLM controller
C.picker assembly
D.cartridge transfer robot
Answer: A
HP HP0-J12 HP0-J12 HP0-J12
NO.19 Which tape device attribute does the ESL E-Series tape library Interface Manager use to determine
the physical location of each tape drive in the library?
A.bus number
B.SCSI address
C.serial number
D.drive slot position
Answer: C
HP HP0-J12 certification training HP0-J12 test answers HP0-J12
NO.20 What is the purpose of the Stop button on the Operator Control Panel of ESL E-Series tape libraries?
A.to halt the robotics
B.to restart the library
C.to shut down the library
D.to pause a running backup process
Answer: A
HP certification training HP0-J12 answers real questions HP0-J12 original questions HP0-J12 HP0-J12 study guide HP0-J12 exam simulations
NO.21 Which parts of the Extended Tape Library Architecture are SNIA compliant and support the Storage
Management Initiative Specifications (SMI-S)? (Select two.)
A.Secure Manager
B.Interface Manager
C.Interface Controller
D.Robotics Controller
E.Command View Tape Library
Answer: BE
HP HP0-J12 certification training HP0-J12
NO.22 What are the main considerations when choosing a location for an EML E-Series tape library? (Select
three.)
A.floor space
B.room height
C.power requirements
D.lighting requirements
E.grounding requirements
F.distance to disk storage
Answer: ACE
HP HP0-J12 HP0-J12 questions HP0-J12 dumps
NO.23 Click the Exhibit button.
What does Number 2 on the exhibit represent?
A.x axis motor
B.y axis motor
C.optical scanner
D.home position sensor
Answer: B
HP certification training HP0-J12 HP0-J12 exam dumps HP0-J12 HP0-J12
NO.24 What is reported by the LP/PNL sensor of an ESL E-Series tape library?
A.library door status
B.x-axis motor position
C.y-axis motor position
D.magazines and load ports status
Answer: D
HP study guide HP0-J12 certification training HP0-J12 HP0-J12
NO.25 Click the Exhibit button.
In the exhibit, which item number represents the host Fibre Channel connections?
A.4
B.6
C.9
D.10
Answer: C
HP HP0-J12 certification training HP0-J12
NO.26 For which connection, other than the cabinet controller, is the I2C network cable used in ESL E-Series
tape libraries?
A.external LANs
B.cluster controllers
C.interface management cards
D.Fibre Channel interface controllers
Answer: B
HP exam HP0-J12 exam simulations HP0-J12 original questions HP0-J12 HP0-J12
NO.27 What does the cabinet controller assembly of an ESL E-Series tape library provide a SCSI interface
to?
A.tape devices
B.library robotics
C.management interface card
D.e2400-160 Interface Controller
Answer: B
HP exam HP0-J12 HP0-J12 braindump HP0-J12 HP0-J12
NO.28 What are possible causes of inventory failure in ESL E-Series tape libraries? (Select two.)
A.The library has a drive failure.
B.One of the clusters is disconnected.
C.The library front is facing bright sunlight.
D.Unapproved bar code labels are being used.
E.The Interface Controller is disconnected from the Fibre Channel switch.
Answer: CD
HP HP0-J12 braindump HP0-J12
NO.29 What is the maximum cartridge slot count in an EML E-Series library?
A.325
B.470
C.505
D.595
Answer: C
HP HP0-J12 HP0-J12 exam
NO.30 What must be configured in CommandView TL when manually adding an ESL E-Series library?
A.library IP address
B.library serial number
C.tape drive and robot SCSI IDs
D.Interface Manager user name and password
Answer: A
HP HP0-J12 HP0-J12 test questions HP0-J12
ITCertKing offer the latest EX0-118 exam material and high-quality MB5-854 pdf questions & answers. Our SY0-301 VCE testing engine and 700-104 study guide can help you pass the real exam. High-quality HP2-B100 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.
Article Link: http://www.itcertking.com/HP0-J12_exam.html
没有评论:
发表评论